News
-
Water-Based Coated BOPET Film for Printing and Lamination: An Interface-Control Guide for Converters
Aug 14,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
Water-Based Coated BOPET Film gives converters a polyester web with a functional water-based coating. Cailong Water-Based Coated BOPET Film should be selected through interface testing, not through the coating name alone. Buyers searching for coated BOPET film for printing usually need stable ink wetting, adhesion, drying, registration, and appearance. Lamination projects add adhesive compatibility, curing, bond retention, and roll quality. The exact result depends on the grade, coated side, ink, adhesive, equipment, and finished structure. No universal barrier, seal, or recycling claim should be assumed. This guide follows each interface from incoming roll through printing, lamination, slitting, and end-use testing. It helps overseas converters qualify a water-based coated polyester film without inventing missing specifications.
-
PET Metallized Film for Foil Replacement: Converting Barrier Data into Shelf-Life and Cost Decisions
Aug 14,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
PET Metallized Film gives packaging buyers a practical barrier layer for demanding flexible packages. Cailong PET Metallized Film reports oxygen transmission below 0.1 cc/m²·24h and water-vapor transmission below 0.3 g/m²·24h. These values support evaluation as an aluminum foil replacement film. They do not establish shelf life without known test conditions and a completed package. Coffee, nuts, dried fruits, and powdered products can each place different demands on oxygen, moisture, light, seals, and aroma retention. Buyers must connect barrier data with lamination, flexing, sealing, filling, distribution, and storage. This article presents a total-cost method for qualifying high barrier packaging film. It also explains where VMPET packaging film can reduce cost and where foil may remain necessary.
-
Water-Based Coated BOPP Film for Printing and Lamination: A Risk-Control Guide for PP Packaging Buyers
Aug 13,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
Water-Based Coated BOPP Film gives converters a PP-based film with an application-specific coated surface. Cailong Water-Based Coated BOPP Film can be evaluated for printing, lamination, and other converting needs within PP-focused packaging development. The product name alone does not define adhesion, barrier, sealing, or recycling performance. Those results depend on the coating grade, coated side, inks, adhesives, equipment, and finished structure. Overseas buyers need a qualification plan that controls each interface and records each acceptance test. This guide explains specification, production trials, bond-failure diagnosis, and roll consistency. It also covers PP mono-material packaging claims and separates verified facts from points requiring grade-specific supplier data.
-
PLA AlOx Film for Transparent Barrier Packaging: A Practical Route from Sustainability Goal to Package Qualification
Aug 13,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
PLA AlOx film gives packaging teams a clear route toward bio-based barrier structures without hiding the packed product. Cailong PLA AlOx Film combines a PLA substrate with a transparent aluminum oxide layer. This structure can support transparent barrier packaging where visibility and product protection must work together. Buyers still need evidence from the complete pack. Barrier needs differ by product, while printing, lamination, sealing, and handling can change final performance. Environmental claims also depend on every package component and the available disposal route. This article uses a project-based framework for evaluating high barrier PLA film. It covers the protection target, structure design, converting trials, claim control, quality checks, and supplier discussions needed before commercial approval.
-
Water-Based Coated MDOPE Film for Mono-PE Packaging: A Structure-Change Decision Framework
Aug 12,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
Water-based coated MDOPE film is relevant to overseas converters replacing difficult-to-recycle mixed-material laminates with PE-oriented packaging structures. Cailong Water-Based Coated MDOPE Film combines an MDOPE substrate with a water-based coating, creating a practical starting point for mono-PE package development while retaining the need for application-specific validation. This article uses a structure-change decision framework rather than a generic product overview. It helps buyers define the existing package problem, assign each layer a function, evaluate barrier and converting requirements, test printing, lamination and sealing, and judge recyclability at finished-pack level. The goal is to reduce material complexity without assuming that a PE-based structure automatically meets shelf-life, process, regulatory or local recycling requirements.
-
PET AlOx Film for Transparent High-Barrier Packaging: From Product Visibility to Microwave-Ready Validation
Aug 12,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
PET AlOx film addresses a difficult packaging brief: protect oxygen- and moisture-sensitive products while keeping the pack transparent. Cailong PET AlOx Film provides light transmittance above 89% and aluminum-oxide layer adhesion above 3.0 N/15 mm. It can support microwave-compatible package development and may replace BOPA, EVOH and selected conventional barrier structures when the full laminate is properly qualified. This article follows the performance-to-process chain from product visibility and barrier protection through printing, lamination, sealing, microwave use and shelf-life verification. It explains what the verified film properties establish, what they do not establish, and how overseas buyers can develop a transparent package without sacrificing the testing discipline required for food, cooked-food, tea, flavoring, pharmaceutical or other sensitive-product applications.
-
High-Adhesion Metallized PET Film: Controlling Metal-Layer Failure in Flexible Packaging Conversion
Aug 11,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
High-adhesion metallized PET film is selected when a converter needs the barrier and light-protection functions of a metallized surface without allowing the metal layer to become the weak interface in a laminate. Cailong High-Adhesion Metallized PET Film maintains aluminum-layer adhesion at no less than 2.5 N/15 mm, including under humidity fluctuations described in the verified product information. This article follows the failure chain that packaging buyers should control—from incoming roll condition and adhesive compatibility to lamination, curing, pouch making, filling, and distribution. It also explains why a single adhesion number cannot replace application trials, how to compare total production risk, and what evidence should support approval of a metallized PET film for food, pharmaceutical, daily-chemical, or precision-electronics protective packaging.
-
BOPLA Film for Biodegradable Packaging: A Buyer’s Decision Guide from Material Claim to Converting Trial
Aug 11,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
BOPLA film is attracting overseas packaging buyers who need a bio-based film option without treating sustainability as the only purchasing criterion. Cailong BOPLA Film is made from PLA derived from renewable feedstocks such as corn and wheat. Under suitable conditions, the material can biodegrade into carbon dioxide and water, while its oriented film structure provides tear resistance, heat-sealing capability, and print adaptability for packaging development. This guide helps converters and brand teams move from a broad biodegradable-packaging objective to a practical material decision. It explains where BOPLA Film may fit, which converting variables require trials, how end-of-life claims should be defined, and what information buyers should exchange with a supplier before commercial approval.
-
Ultra-High Barrier Metallized PET Film for Foil Replacement: How Buyers Protect Shelf Life and Control Packaging Cost
Aug 10,2026 | FOSHAN CAILONG METALLIC PACKAGING MATERIAL CO.,LTD
Ultra-High Barrier Metallized PET Film can help flexible-packaging buyers reduce dependence on aluminum foil while maintaining protection against moisture, oxygen, light, and ultraviolet exposure. Cailong Ultra-High Barrier Metallized PET Film combines a PET substrate with a thin deposited aluminum layer and can be evaluated for food, pharmaceutical, electronic-component, and other protective packaging. Its potential value is not limited to film price: a suitable MetPET structure may lower package weight, improve flexibility, simplify converting, and reduce total material cost. However, metallized PET is not identical to foil. Buyers must define the product’s real barrier requirement, qualify adhesion and barrier retention after converting, establish reliable sealing, and prove shelf life in the finished package before approving a replacement.